Mobil™
Lubrication technology
POWER GENERATION · THAILAND
Reliability Across
the Plant Lifecycle.
From EPC initial fill and commissioning to major overhaul and long-term plant life improvement, SUTAIYO combines Mobil™ lubrication technology, Lubefix reliability services and engineering support for critical power generation assets.
OFFICIAL APPOINTMENT
ความไว้วางใจจาก Mobil
สู่ภารกิจดูแลโรงไฟฟ้า
ทั่วประเทศไทย
สุไทโยได้รับการแต่งตั้งอย่างเป็นทางการจาก ExxonMobil Thailand ในฐานะ Strategic Distributor เพื่อดูแลกลุ่มลูกค้าอุตสาหกรรมโรงไฟฟ้าทั่วประเทศ
ด้วยความพร้อมด้านทีมงาน ความเชี่ยวชาญ และบริการด้าน Reliability เราพร้อมสนับสนุนทีมโรงไฟฟ้า ตั้งแต่การเตรียมระบบก่อนเดินเครื่อง การหยุดซ่อมบำรุง ไปจนถึงการดูแลเครื่องจักรตลอดอายุการใช้งาน
NATIONWIDE SUPPORT. COMMITTED TO RELIABILITY.
POWER GENERATION RELIABILITY
The lubricant is only
one part of reliability.
Combined Cycle Power Plants depend on multiple critical lubrication systems operating under heat, contamination, long service intervals and demanding availability targets.
SUTAIYO brings lubricant selection, system cleanliness, contamination control, oil condition monitoring and field execution together as one reliability strategy.
Lubefix
Field reliability services
SUTAIYO
Engineering + nationwide support
LIFECYCLE SOLUTIONS
DESIGN · MAINTAIN · ENHANCE
The reliability need changes as the plant moves from construction to operation and long-term life. Our solution architecture follows the same journey.
01
NEW PLANT / EPC
DESIGN
Initial Fill & Commissioning Solutions
- OEM / lubricant specification review
- Mobil™ product & volume planning
- Pre-commissioning system preparation
- High Velocity Oil Flushing
- Controlled new-oil filling & filtration
- Baseline oil analysis & handover
02
SHUTDOWN / MAJOR OVERHAUL
MAINTAIN
System Overhaul Solutions
- Pre-outage oil health assessment
- Reservoir & system cleaning
- High Velocity Oil Flushing
- Water / particle / varnish removal
- Oil replacement & transfer management
- Restart cleanliness verification
03
OPERATING / AGING PLANT
ENHANCE
Power Plant Life Solutions
- Oil Condition Monitoring
- Varnish & MPC management
- Water & contamination control
- Oil life / antioxidant assessment
- Root cause & consumption investigation
- Reliability improvement roadmap
COMBINED CYCLE FOCUS
One plant.
Multiple lubrication environments.
Mobil™ + Lubefix + SUTAIYO integrate lubrication, cleanliness, condition and correction across the plant.
Gas Turbine
Oxidation, varnish, control-oil cleanliness, servo-valve reliability and long drain life.
Steam Turbine
Water ingress, demulsibility, rust risk, contamination, sludge and lubricant aging.
Generator
Bearing lubrication, auxiliary systems and contamination management.
Balance of Plant
Pumps, compressors, fans, gearboxes, motors and hydraulic systems.
OEM & TURBINE MODEL REFERENCE
Check the turbine model.
Confirm the lubricant requirement.
Mobil lubricant references by turbine model and specification.
SUTAIYO can help verify the latest manual, lubrication circuit, viscosity grade and conversion requirements before final selection.
Check Your Turbine
Mobil DTE 832Mobil DTE 846Mobil DTE 932 GTMobil DTE 732 GearedMobil DTE 746 Geared
| OEM | Turbine / specification example | Mobil product reference | Published basis |
|---|---|---|---|
| Siemens | SGT-800 (former GTX 100) · Plain bearing Applications requiring TLV 9013 04 / 05 | Mobil DTE 832 · ISO VG 32 Mobil DTE 846 · ISO VG 46 | Mobil Equipment Builder lists both products for SGT-800 standard builder operating conditions; PDS records TLV 9013 04 / 05 approval. |
| Siemens | Geared turbine applications governed by Siemens Industrial Turbo Machinery specifications | Mobil DTE 732 Geared · ISO VG 32 Mobil DTE 746 Geared · ISO VG 46 | DTE 700 Geared PDS lists Siemens 65/0027 and MAT-series specification coverage. Verify exact model, manual and viscosity. |
| GE | Frame 3, 5, 6, 7 and 9 · Common bearing / hydraulic reservoir | Mobil DTE 932 GT · ISO VG 32 | Formulated for these GE frames, particularly Frames 6, 7 and 9 where hydraulic varnish control is desired. Not for steam turbines. |
| GE | GEK 28143B and selected GE / former Alstom turbine requirements | Mobil DTE 832 · ISO VG 32 Mobil DTE 846 · ISO VG 46 | DTE 800 Series PDS records applicable GE recommendation, approvals and specification coverage by grade. |
| Mitsubishi Power | M501F / M701F · M501G / M701G · M701G2 | Mobil DTE 732 M / Mobil DTE 732 M2 | Separate model reference. These are not Mobil DTE 732 Geared; do not substitute by name alone. |
LUBEFIX RELIABILITY SERVICES
Engineering beyond the lubricant.
Field services designed to establish, restore and maintain lubricant-system condition in critical power generation equipment.
01 · SYSTEM CLEANLINESS
High Velocity Oil Flushing
Temporary flushing loops, high-flow circulation, filtration, particle monitoring and cleanliness verification for commissioning and overhaul.
02 · CLEANING
Reservoir & Tank Cleaning
Removal of sludge, deposits and contamination from accessible reservoir surfaces before refill or system restoration.
03 · PARTICLE CONTROL
Oil Filtration
Offline / transfer filtration for particle removal and target cleanliness management before or during operation.
04 · WATER CONTROL
Vacuum Dehydration
Water removal for turbine, control and lubrication oils where moisture must be reduced without immediate oil replacement.
05 · VARNISH
Varnish Mitigation
Assessment and treatment strategies for degradation products that may affect valves, bearings, reservoirs and filters.
06 · FLUID HANDLING
Oil Transfer & Filling
Controlled drain-out, pre-filtration, new-oil transfer and initial filling using dedicated cleanliness practices.
07 · CONDITION MONITORING
Oil Condition Monitoring
Sampling, analysis, trending and technical interpretation covering lubricant health, contamination and wear indicators.
08 · RELIABILITY ROADMAP
Reliability Health Check
Plant-level review of lubrication applications, oil condition, storage, handling, filtration and improvement priorities.
INTEGRATED RELIABILITY PLATFORM
Technology. Field execution. Engineering support.
Mobil™
High-performance industrial lubrication technology for turbine, hydraulic, compressor, gear and auxiliary applications.
Lubefix
Specialized field services for flushing, cleaning, filtration, de-watering, varnish mitigation, fluid transfer and oil analysis.
SUTAIYO
Application engineering, project coordination, supply planning, technical interpretation and nationwide support across Thailand.
SUCCESS CASES
Real field challenges.
Engineered solutions.
Power-generation work scopes from Lubefix public references, spanning commissioning, planned outages and corrective work.
Power Plant Initial Fill & Commissioning Support
Challenge: Control contamination and lubricant handling during commissioning before normal operation.
Scope: Contamination measurement, oil filling, oil draining, flushing-oil management and oil analysis.
BaselineOil condition assessmentControlledFluid handling process
System Overhaul & High Velocity Oil Flushing
Challenge: Restore lubrication-system cleanliness during a scheduled maintenance window.
Scope: Contamination assessment and High Velocity Oil Flushing for planned turnaround work.
AssessPre-work conditionRestoreSystem cleanliness
Varnish + Tank Cleaning + HVOF Restoration
Challenge: Lubrication-system condition required more than a conventional oil change.
Scope: Varnish mitigation, drain/fill, tank cleaning and High Velocity Oil Flushing.
Multi-stepCorrective approachSystemIntegrated service scope
Water Contamination & De-Watering
Challenge: Water contamination in a control-oil system required a corrective treatment approach.
Solution: Lubefix applied a de-watering process to the existing control oil.
200 ppmReported result in linked caseWater controlApplication-specific treatment
A case-specific value, not a universal acceptance limit or guaranteed result.TECHNICAL KNOWLEDGE CENTER
Technical answers for real plant decisions.
For maintenance engineers, reliability teams, plant managers, EPC teams and commissioning engineers.
RELIABILITY SOLUTION FINDER
Start with the plant condition
— not a product.
Select your lifecycle stage, system and current challenge. Explore a SUTAIYO reliability path to discuss with our engineering team.
THAILAND NATIONWIDE SUPPORT
From initial fill
to lifetime reliability.
Planning a new Combined Cycle project, major overhaul, water / varnish corrective job or long-term reliability program? Bring SUTAIYO into the discussion early.
พร้อมประสานผลิตภัณฑ์ ทีมผู้เชี่ยวชาญ และงานบริการ เพื่อดูแลโรงไฟฟ้าทั่วประเทศไทย ตามสภาพเครื่องจักรและแผนงานของแต่ละโรงไฟฟ้า
Contact Power Team
TALK TO OUR POWER TEAM
Tell us about
your plant.
Share your lifecycle stage, equipment and current challenge so our team can help shape the next discussion.
พูดคุยกับทีมสุไทโยเกี่ยวกับการเลือกน้ำมันหล่อลื่น การเตรียมระบบ งาน Overhaul หรือแนวทางดูแล Reliability ของโรงไฟฟ้า
